A Guest‐Dependent Approach to Retain Permanent Pores in Flexible Metal–Organic Frameworks by Cation Exchange

Two anionic metal–organic frameworks were successfully prepared based on pre‐designed flexible multicarboxylate ligands and indium cations. Owing to the flexibility of the bridging organic linkers, which could not themselves sustain the frameworks, both of the frameworks showed thermal instability and shrinkage after removal of guest solvent molecules. Inspired by bamboo, we used a guest‐dependent approach to tune the permanent porosity of the MOFs. In this approach, several tetraalkyammonium cations of different sizes were introduced into the channels by cation exchange to act as partitions and to support the main frameworks. This approach significantly enhanced the stability of the framework and its permanent porosity. Moreover, the gas‐adsorption properties (such as gate sorption, hysteresis, and selectivity) of the MOFs were also modulated by the judicious choice of guest cations.     

Automated human frontal lobe identification in MR images based on fuzzy-logic encoded expert anatomic knowledge

Identification of human brain structures in MR images comprises an area of increasing interest, which also presents numerous methodological challenges. Here we describe a new knowledge-based automated method designed to identify several major brain sulci and then to define the frontal lobes by using the identified sulci as landmarks. To identify brain sulci, sulcal images were generated by morphologic operations and then separated into different components based on connectivity analysis. Subsequently, the individual anatomic features were evaluated by using fuzzy membership functions. The crisp decisions, i.e., the identification of sulci, were made by taking the maximum of the summation of all the membership functions. The identification was designed in a hierarchical order. The longitudinal fissure was extracted first. The left and right central sulci were then identified based on the left and right hemispheres. Next, the lateral sulci were identified based on the central sulci and hemispheres. Finally, the left and right frontal lobes were defined from the two hemispheres. The method was evaluated by visual inspection, comparison with manual segmentation, and comparison with manually volumetric results in references. The average Jaccard similarities of left and right frontal lobes between the automated and manual segmentation were 0.89 and 0.91, respectively. The average Kappa indices of left and right frontal lobes between the automated and manual segmentation were 0.94 and 0.95, respectively. These results show relatively high accuracy of using this novel method for human frontal lobe identification and segmentation.     

Experimental evaluation of dual acceptance window weighting function for right coronary MR angiography at 3.0T

To shorten scanning time and increase the feasibility of experimental results, we performed right coronary artery magnetic resonance angiography (CMRA) at 3.0 T using dual acceptance window weighting function in 25 normal subjects. We examined these subjects using conventional navigator with fixed gating window and 6 dual acceptance window weighted gating (DAWG) sequences with different central weighted ratio (CWR). Compared with the conventional navigator sequence, DAWG sequences with CWRs of 20% and 25% increased the scanning efficiency by 30% and 26% respectively (P<.05), while maintaining good image quality; further the corresponding scanning time decreased from 2.12–1.64 and 1.69 min, respectively (P<.05). However, CWRs less than 15% caused image degradation to some extent. The coronary artery lengths and diameters did not show statistically significant differences between the two techniques (P>.05). Briefly, to avoid the problems caused by low navigator efficiency and to maintain comparable image quality, the weighted gating parameters of 3 mm width central acceptance window and 15 mm width outer acceptance window with CWR between 20% and 25% are recommended for right CMRA at 3 T.     

预处理对355nm激光作用下熔石英损伤增长的影响

测试了经化学蚀刻、紫外激光预处理及其共同处理后的熔石英355 nm激光损伤阈值;研究了处理前后其损伤斑面积随激光辐照脉冲数的增长情况。结果表明,处理后熔石英355 nm激光损伤阈值得到了提高,且损伤斑面积增长变慢。利用CO2激光对熔石英表面损伤点进行了修复处理,修复后的损伤点R-on-1抗损伤阈值和基底阈值相当,损伤增长得到有效抑制。     

Optimal control approach to stability criteria on Hill’s equations

This paper gives a tutorial on how to prove Lyapunov type criteria by optimal control methods. Firstly, we consider stability criteria on Hill's equations with nonnegative potential. By optimal control methods developed in 1990s, we obtain several stability criteria including Lyapunov's criterion, Neǐgauz and Lidskiǐ's criterion. Secondly, we present stability criteria on Hill's equations with sign-changing potential in which Brog's criterion and Krein's criterion are included.     

Surface Structure and Electronic Property of InP（001）-（2×1）S Surface： A First-Principles Study

The surface structure and electronic property of InP（001）-（2 ×1）S surface under S-rich condition are investigated based on first-principles simulations. The analyses of phase transition show that the 3B model is the most stable structure and the S-S dimer is difficult to form. The geometry of the 3B structure agrees well with the experiments. It is also found that the 3B structure has a good passivation with a band gap of about 1.24eV. The results indicate that the 3B structure is the best candidate for the sulfur-rich InP（001）（2 × 1）A phase.     

纳秒激光诱导C60分子碎裂中轻碎片离子C+n(n《30)的产生机理研究

采用飞行时间质谱计测量了纳秒激光诱导C60分子碎裂中轻碎片离子C n(n≤11)的初始平均动能,结果显示轻碎片离子具有相同的初始平均动能(约为0.34 eV),并且该动能在一定范围内不随激光通量的变化而明显改变.结合前人的实验结果,对纳秒激光诱导C60分子碎裂中轻碎片离子C n(n<30)的主要产生模式作了新的阐述,即C60分子级联发射15个C2分子和一个电子形成自身不稳定的C 30离子,在皮秒时间尺度内C 30离子的笼形结构塌陷,进而轻碎片离子产生.     

A Continuous-Wave Ho：YA103 Laser with Output 8.5 W Pumped by a 1.91μm Laser at Room Temperature

A cw high efficient Ho：YAI03 laser pumped by 1.91 μm diode-pumped Tm：YLF laser at room temperature is realized. The maximum output power reaches 8.5 W when the incident pump power is 15.6 W. The slope efficiency is 63.7%, and the Tm：YLF to Ho：YAP optical conversion efficiency is 54.5%. The laser wavelength is 2118.3nm when the transmission of output coupler is 30%. The beam quality factor is M2 -1.39 measured by the traveling knife-edge method.     

Photoluminescence and optical absorption properties of polymer modified carbon nanotubes

Polymethyl methacrylate modified carbon nanotubes were prepared using γ radiation, and the modified carbon nanotubes exhibited strong luminescence (∼ ∼568 nm) at room temperature and an absorption peak at ∼ ∼247 nm can be observed in the polymer modified samples.